RuneMarkers - Zulrah Tile Markers (2024)

Tile Data

pretty print

[{"regionId":9007,"regionX":28,"regionY":61,"z":0,"color":"#FFFFFF00"},{"regionId":9008,"regionX":24,"regionY":0,"z":0,"color":"#FFFFFF00"},{"regionId":9008,"regionX":32,"regionY":0,"z":0,"color":"#FFFFFF00"},{"regionId":9008,"regionX":32,"regionY":6,"z":0,"color":"#FFFFFF00"},{"regionId":9008,"regionX":24,"regionY":6,"z":0,"color":"#FFFFFF00"},{"regionId":9008,"regionX":34,"regionY":5,"z":0,"color":"#FFFFFF00"},{"regionId":9008,"regionX":22,"regionY":4,"z":0,"color":"#FFFFFF00"}]

RuneMarkers - Zulrah Tile Markers (2024)

FAQs

How to mark tiles in RuneLite? ›

Marking tiles can be done by holding the shift key and right clicking the tile you want to mark and then click "Mark tile" in the menu.

What are the odds of getting a unique Zulrah? ›

There is a 1/256 chance of hitting the unique drop table per roll. Zulrah gives two rolls per kill, meaning there's approximately a 1/512 chance per kill to receive a specific item from this table (or ~1/128 for any item).

How many Zulrah kills per hour? ›

With maximum stats and gear, upwards of 35 kills per hour can be achieved, resulting in 3,587,369.00 gp per hour before supplies. Typical gear includes the use of Void Knight equipment especially when ranging.

How many Zulrah scales per hour? ›

With 90 Fishing and Cooking, you can expect to gain about 21,300 Fishing experience, 23,800 Cooking experience, and about 1,200 Zulrah's scales per hour.

What do you mark tiles with? ›

Using a pencil or fine marker pen, mark where the tile needs to be cut. Make sure that you mark the tile smaller than the space to allow for even grout joints. Use the tile cutter to score each of the lines that will be cut. This creates a break point in the tile.

Is Mage only Zulrah viable? ›

Zulrah's serpentine and magma form are weak to magic, with serpentine being the weakest, while its tanzanite form is highly resistant to magic. Because of this, the player should always avoid Zulrah's tanzanite form during mage-only runs.

What is the drop rate of Zulrah mutagen? ›

However, since Zulrah gives two rolls to its drop table per kill, the chances are doubled, giving a 1/3,276.8 chance for any mutagen or a 1/6,553.6 chance for a specific mutagen.

Do I need elite void for Zulrah? ›

Regular Void will work, but Elite Void is highly recommended.

When should you range Zulrah? ›

Zulrah is only weak to Ranged while in tanzanite (blue) form; therefore, it is best to opt for a Magic-based approach. A serpentine helm is very useful for its immunity to venom, despite it having negative Magic and Ranged bonuses.

What is the antidote at Zulrah? ›

The first dose will reduce the venom to poison and the second will remove the poison. In addition, it provides up to 36 seconds immunity to venom upon drinking it. Antidote++ is used to create anti-venom. This can be done by adding Zulrah's scales into it, requiring 87 herblore.

How to speed up Zulrah? ›

As a fast speed-kill achievement, the player will want to use thralls, and all damage-boosting equipment and prayers available for both ranged and magic. Any hits that would deal over 50 damage to Zulrah will be reduced to 45-50 damage.

Do you need Zulrah scales for blowpipe? ›

The toxic blowpipe is charged with Zulrah's scales; it cannot be wielded if it is uncharged, except when fully degraded while equipped. It uses unpoisoned darts as ammunition, and can hold up to 16,383 scales and 16,383 darts, costing 1,785,747 coins for the zulrah scales to fully charge.

How do you mark objects in Runelite? ›

Marking objects can be done by holding the shift key and right clicking the object you want to mark and then click "Mark" in the menu. Removing a marked objects follows the same principle, shift right click the object and select the menu option again to remove the object.

How do you mark tiles for drilling? ›

Measure, Measure Again, Then Mark

You'll need it to grip into the tile and not skid around the surface. To create some tension, consider using masking tape over the area where you'll drill. Measure (and then re-measure!) the area you need to drill and mark with an X over the masking tape.

How do you mark a floor for tile? ›

Measure & Mark Layout Grid

The first step in laying out tile is to mark a guideline, or layout line, in the room to make sure your tile pattern is evenly centered. Measure the four walls in the room with a tape measure to find the midpoint. Snap a chalk line between the marks from two opposite walls.

Top Articles
Latest Posts
Article information

Author: Edmund Hettinger DC

Last Updated:

Views: 5777

Rating: 4.8 / 5 (58 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Edmund Hettinger DC

Birthday: 1994-08-17

Address: 2033 Gerhold Pine, Port Jocelyn, VA 12101-5654

Phone: +8524399971620

Job: Central Manufacturing Supervisor

Hobby: Jogging, Metalworking, Tai chi, Shopping, Puzzles, Rock climbing, Crocheting

Introduction: My name is Edmund Hettinger DC, I am a adventurous, colorful, gifted, determined, precious, open, colorful person who loves writing and wants to share my knowledge and understanding with you.