How to reset the soundbar or home theater system (2024)

FAQs

How do you reset a soundbar? ›

To soft reset your soundbar, shut it down, unplug it, and wait 30 seconds before powering it back on. For a hard reset, hold down the power button for about 10 seconds. A reset can address many problems, like if the soundbar won't connect to the TV or a Bluetooth device.

Check Connections:Ensure that the HDMI cable between the TV's HDMI 1 (ARC) port and the soundbar's HDMI ARC port is securely connected. Verify that the soundbar is powered on and set to the correct input source.TV Audio Settings:Access the TV's settings menu using the remote. Navigate to the audio or sound settings.

If the pairing is not working, it is typically because it is being performed incorrectly, or the product may need to be reset, updated, or may not be compatible with the soundbar. Soundbars will only pair to a bluetooth device that plays audio, like a TV, tablet, or phone.

You may already be familiar with the technique of merely unplugging the device. The easiest way to reset an audio component is to disconnect it from the power source, wait 30 seconds, and then plug it back in and try again. The waiting part is important because most electronic technology contains capacitors.

Select Start and Settings. Select System > Sound > Volume mixer. Select Reset under Reset sound devices and volumes for all apps to the recommended defaults.

When there is no sound from your soundbar, you should make sure the connected devices are turned on, the soundbar is set to the correct source, and the cable is connected properly. Depending on your setup type, the steps may be different.

All you need to do is turn on the soundbar, make sure it's in pairing mode, and then discover it on your TV using the remote control. Once discovered, select "Bluetooth" from the list of available inputs on your TV screen or menu system and pair them up with each other using codes displayed on both devices.

Why has my sound bar stopped working? ›

Check your cables to ensure they're in good condition, if not, replace the cables as needed. Reconnect the cables connecting your TV to your soundbar or audio system making sure all cables are secure. Then turn on your TV, followed by your system. Refer to the connection options as needed.

All you have to do is to plug one end into the HDMI port on your TV and plug in the other end into an available port on your soundbar. You'll also need to make sure that both devices are turned on before doing this step. If there isn't enough power in the HDMI cable, try using an optical audio cable instead.

When there is no sound from your soundbar, you should make sure the connected devices are turned on, the soundbar is set to the correct source, and the cable is connected properly. Depending on your setup type, the steps may be different.